FYI this is also transferable to all tanks and coils.3F Vape do a cheap as chips ‘styled tribute’ version – *coughs* – I may or not – I couldn’t possibly say – be ‘interested’ Taifun’s are very special – never owned one but had a toot on one – can’t remember which – but yes it was a surprise teaming up with Aspire!Taifun is one of brands that not everyone knows about but it is held in high regard, moreso for their rta’s which is why some people were surprised when they teamed up with aspire as taifun falls in the high end category.

The 7 for replacing is a bit harsh, but it's honest. The GT Mini is available in Stainless Steel, Blue, Gold and Black. The problem I am getting is a lot of gurgling and it feels like I am sucking through a straw.Any hints and advice appreciated on if I need to change e liquid or coil strengthHi Clair, As you may know, the gargling suggests there is excess liquid in the coil or base of the tank.This could mean either, the liquid is very slowly leaking into the coil (which in this case i highly doubt because you’re using 70/30 with the 1.8ohm coil)…OR, there is excess liquid in the coils, from when you installed the coil or filled the tank.To fix this get a bit of tissue and wrap it around the airflow (very loosely) and blow into the tanks mouthpiece once, fairly hard but not as hard as you can. The With such a strong past, does the GT Mini do enough to stand shoulder to shoulder with it’s brothers?This was sent over free of charge for the purpose of review from Aspire – Vape kits from Aspire always comes nicely presented, and their collaboration pieces are no exception.It’s quite a tall tank for a 22mm atomizer that only holds 2.8ml. You can, but only just!It’s quite a restrictive DTL vape, on a scale of 1 to 10, where 1 is like sucking a golf ball through a garden hose, and 10 is totally unrestricted, it managers to hit a 5.5.The moment you start to close down the airflow, you’re definitely into Mouth to Lung territory! If you continue to use this site we will assume that you are happy with it. The tissue is there to catch the liquid, instead of it splattering everywhere.After this the gargling should have gone. You can afford to push it a little higher with 50/50 e-liquid, and the wicking keeps up fine. Again, it starts to be a bit heavy on the chest with the airflow set to 1.5mm or below.30W is a bit too much for any less than 2.5mm airflow in my opinion.It is sufficient for Direct To Lung vaping for a puff or two, after that it starts to seem like it’s burning.Although there is a subtle hint of peach with a nice cloud, I’d recommend sticking to 25W.This coil is recommend to be used at 7 – 11W; so I started at 5w.At 5w, I had to check the mod was turned on, there was seemingly nothing, regardless of airflow.In search for something, anything, I turned the mod up to 7w. Nice try aspire, you also made perfection.Vaping since (2012), back when choice was limited. In total you have 9 coils available.Now some of these will definitely be easier to find than other these days, but the 0.7Ω and 1.6Ω that it comes with are widely available and give suitably different styles of vape.It’s always interesting writing reviews about something like a Nautilus, because unless they have made some ridiculous mistakes (not much chance of that!

The Nautilus GT Mini is a 22mm version of the Nautilus GT, designed by Taifun using a similar aesthetic to their GT line of RTAs. Between Vaping and family, i don't often have a second to spare. © Copyright 2020- Electronic Cigarette Reviews By ecigclick.co.ukAspire Nautilus GT Mini Review – A Collaboration with SmokerStoreWe use cookies to ensure that we give you the best experience on our website. (If not try just 1 more time- with the airflow hole facing downwards).If the gargling comes back or it starts leaking through the airflow hole before you change the coil again, then it is likely either the coil isn’t installed properly or the coil is leaking.Let me know how you get on. I knew right away that I wanted to learn as much about all these devices as possible, and I quickly got into rebuildables and replaceable battery mods. In this position there is absolutely no air going into the tank, so don’t try to vape it like this.It does make sense though, as it’s a nice way of making sure you’re not going to get any leaking.

Aspire Nautilus GT Mini Tank. There’s also a 3.5ml PSU tube available. This is very much in line with other Taifun tanks, but it might be a negative for some people.Personally, I think on a side-by-side mod like the recently released I received the black version of the Aspire Nautilus GT Mini to review, but it also comes in Gold, Blue and Stainless steel.One interesting thing is that they haven’t just coloured them all differently, they actually have slightly different materials to achieve the different colours.The Black, Steel and Blue all use vacuum plating over the stainless steel (the earlier Aspire GT used DLC for the black), with the gold using gold plating.Similarly the drip tips are slightly different, the gold uses PEI (ultem) the Steel uses PCTG, the Blue uses acrylic, and the Black uses POM (delrin).Starting at the top, the drip tip is a comfortable double o-ringed 510.It has a metal base, and then one of the four different plastics (depending on colour) for the tip.It’s a relatively wide bore for a mouth to lung tank, but all of the restriction is controlled by the airflow.The top cap has very fine knurling, so it’s really easy to grip.There’s little dots on the top cap, which you line up to remove it for filling.Interestingly the top cap has an ultem section at the bottom, which becomes part of the chimney when it’s put together.This should reduce liquid coming up into the mouthpiece.The tank itself is made from Pyrex (2.8ml) or Acrylic (2ml) for the TPD markets.This is contained within a very attractive stainless steel cage design, which should reduce the risk of cracking the glass if it falls over.I’ve always been a fan of caged tank designs as I love how they look. (on average it will receive a 4.4/10, I think that's perfectly fair).